Closed Mon 30th November – Fri 4th December. I am closed 30th Nov - 4th December. Bookings stay open, and anything arriving then is repaired from Mon 7th December.

GHD Hair Straightener Repair

GHD straightener repair by post: won't heat, won't turn on, cutting out or beeping. Fixed prices, PAT tested, with a 12-month warranty.

Most GHD faults come down to one part, and many are worth repairing.

From £29 All-in repair £29: classic stylers (3.1b, Mk4, Mk5) £39: Gold, Max, Platinum+, Mini & Curve
  • Return postage included
  • Parts included
  • PAT test
  • No fix, no fee
  • 12-month warranty

New to this? Start with How to Get Your GHDs Repaired: A Step-by-Step Guide →

Choose a repair

More about GHD repairs

A GHD that has stopped working is rarely finished. Most faults come down to one part that has worn or failed: a thermal fuse that has blown, a mains cable that has broken inside where it bends, or a component on the board that has aged. Replacing that part costs far less than a new pair, and I do GHD repair by post for customers anywhere in the UK.

GHD faults I repair

Not heating up, or heating then cooling down

This is the most common GHD repair. The lights come on and they beep, but the plates stay cold, or they heat slowly and don't quite get there. The usual cause is a blown thermal fuse, a small safety part that cuts the heat if the iron gets too hot and can fail on its own with age. It's the GHD not heating up repair: I replace the fuse and check the parts around it that can fail at the same time. Why won't my GHD heat up? covers the three usual causes, and GHD heats up then cools down covers the one that starts hot and fades.

Dead, or cutting out when you move the cable

GHDs that are completely dead, cut in and out, or only work with the cable held at an angle usually have a mains cable that has broken where it enters the iron. That point takes all the bending and twisting of everyday use. It's the GHD power and cable repair: I repair or replace the cable and check the power connections and switch while the iron is open. Some older cable colours, particularly pink and purple, are no longer made, so a black cable may be used. GHD cutting out or only working at an angle explains the signs, and GHD won't turn on has the checks for a pair that's completely dead.

Beeping and won't heat

A GHD that beeps repeatedly and won't heat isn't always broken. Read GHD beeping and won't heat up before you book anything, and why is my GHD beeping for what each beep means. Flashing red and beeping? Here's what the GHD red light means.

Buzzing, sparking or a burning smell

Stop using them and unplug them at the wall. These usually mean a connection is arcing inside, often in a cable that's breaking down, and they're usually repairable once they've been opened up safely. Don't plug them in again to check. GHD sparking or smoking, GHD smells like burning and GHD making a buzzing noise explain what's behind each one.

One plate heats and the other doesn't

It can be the fuse, a resistor or a heater, and it's covered by the not heating up repair. I find which part has failed when they arrive. One GHD plate not heating goes through the causes.

Plates not closing, or a loose hinge

Not every fault is electrical. A worn hinge, a plate that has worked loose on its mount, or a failed internal spring stops the plates meeting evenly, and you get patchy results. These are usually put right by tightening, re-seating or replacing the part, under the GHD straightener repair. GHD plates not closing explains why it matters for your hair as well as the feel.

Something else, or you're not sure

You don't need to work out the fault yourself. The GHD straightener repair covers any fault on a repairable model: tell me what they're doing when you book, and I'll find the fault and fix it.

Which GHD models I repair, and what it costs

The price depends on the model, not the fault. The Original 3.1b, Mk4 and Mk5, including the SS, MS and SC versions, are £29. The Gold, Max, Platinum+, Mini and Curve are £39. On the Mk4 and Mk5 I also replace the R8 and R11 resistors as a matter of course, because they're known to fail with age.

The Eclipse (Mk6) and the original Platinum (S8T261) are sealed units: the heaters, thermistor, thermal fuse and circuit board are one assembly with no replaceable parts. The mains cable can still be replaced, and that's the Eclipse and Platinum cable replacement at £29. If the fault is inside, a new cable won't bring them back, so get in touch first if you're not sure which it is. Can the Eclipse and Platinum be repaired? explains why.

Go by the model number on the label, not the switch. The Gold, Max, Mini and Platinum+ (S8T262) have a round button too, but they're a different design and repairable. How to find your GHD model number shows you where to look. If you can't find it, choose "Not sure / other" when you book and I'll confirm the model when they arrive.

The GHD Curve curling tongs and wands are repairable too, usually the cable or a heating part: GHD Curve repair.

How GHD repair by post works

Book the repair that matches the fault, or the any-fault repair if you're not sure, and pick your model so the price is confirmed. You pay when you book.

Post them to me. Your confirmation email has the address and packing guidance: wrap them well, pad them, and use a sturdy box. You pay the postage to me.

I find the fault and repair it. Every repair is heat-tested, to check they reach temperature properly, and PAT tested, which matters on a mains appliance that heats to around 200°C.

They come back by insured, tracked post, with updates as they move through each stage. The current turnaround is shown when you book. If a part needs ordering, I'll tell you as soon as I've found the fault.

The price is all-in: parts, labour, the PAT safety test and tracked return postage. Every repair is covered by a 12-month warranty, and if I can't repair them, it's no fix, no fee: I refund what you paid, less return postage. How to get your GHDs repaired walks through the whole route, from checking the warranty to packing them.

Is it worth repairing GHDs?

Usually, yes. A new pair costs considerably more than a repair, and the pair you own has usually lost one small part, with the plates and the rest of the iron still in good condition. The exception is a sealed Eclipse or original Platinum with a fault inside, where only the cable can be replaced. Are GHDs worth repairing? sets out when repair makes sense and when it doesn't, and how much GHD repair costs compares the prices.

GHD's own service and mine

GHD straighteners have a two-year warranty from the date of purchase. While yours are inside it, go to GHD first. They don't repair straighteners: if they accept a claim, they send a replacement. Don't open them, or have anyone else open them, before you claim, because that may give GHD a reason to decline.

Outside those two years, you may still have rights against the shop you bought them from. Under the Consumer Rights Act, goods have to last a reasonable length of time, and claims against the retailer can be made for up to six years (five in Scotland). After that, the choice is between an independent repair and a new pair. Does GHD repair straighteners? sets out what GHD offer, and GHD out of warranty covers your options once the warranty has run out.

GHD repair near me

GHD repair is specialist work: the model-specific faults, the right parts and the correct thermal fuse ratings. A specialist isn't usually on the local high street, but GHDs are small and light to post, so where you live doesn't matter. Book online, post them from any post office or parcel point, and follow them by tracking. GHD repair near me explains why posting them is usually the easier route.

Can you repair GHDs yourself?

The thermal fuse and the mains cable are safety parts on an appliance that runs at around 200°C, and fitting the wrong fuse rating is a real risk. Can you repair GHD straighteners yourself? and how to change a GHD thermal fuse set out what's involved and the risks, so you can decide.

Before you post them

A few free checks are worth doing first: try another socket, and try a new fuse in the plug. The checks in GHD won't turn on and why won't my GHD heat up take a few minutes. Once they're fixed, how to make GHDs last longer covers the habits that are hardest on the cable.

I also repair GHD hair dryers, with fixed prices for the Helios and the Air and an assessment for the Air 2.0, Speed and Flight; this guide covers what usually goes wrong.

Guides

Frequently asked questions

Does GHD repair straighteners?
No. GHD don't operate a repair service. Within warranty they replace faulty straighteners, and they don't publish an out-of-warranty repair service. So once the warranty has run out, the choice is between an independent repair and a new pair.
Which GHD models do you repair?
The Original 3.1b, Mk4 and Mk5 (including SS, MS and SC versions) are £29. The Gold, Max, Platinum+, Mini and Curve are £39. The Eclipse (Mk6) and the original Platinum (S8T261) are sealed, cable replacement only, at £29.
Do you repair GHD hair dryers?
Some faults, yes, but get in touch before you book so I can tell you whether yours is repairable. I don't repair the GHD Air 2.0.
Is a repaired GHD safe to use?
Every mains repair is PAT tested before it goes back, and every repair has a 12-month warranty. If a straightener sparks, smells of burning or has a damaged cable, stop using it and get it looked at.
Do I need to know what's wrong before I book?
No. The GHD straightener repair covers any fault on a repairable model. Tell me what they're doing when you book, and I'll find the fault.
Can you match my cable colour?
Usually. Some older colours, particularly pink and purple, are no longer made, so a black replacement cable may be used.
What if you can't repair them?
It's no fix, no fee: I refund what you paid, less return postage, and send them back.