A GHD hair dryer that stops working is usually one failed part away from working again: a cable, a switch, a thermal fuse, the heater, the fan or the motor board. Here's what a repair costs, model by model, what changes the price, and how it compares with buying a new dryer.
Prices last checked: November 2026.
My prices
- GHD Helios: £49 for any fault, all parts included.
- GHD Air: £45 for any fault except the motor, which I quote separately if it needs replacing.
- GHD Air 2.0, Speed, Flight and other GHD dryers: £4.99 to book an assessment, then a fixed quote before any work.
Each fixed price includes the part, labour, a PAT safety test, tracked return postage and a 12-month warranty. If I can't repair it, it's no fix, no fee: I refund what you paid, less the return postage and packaging charge.
What other repairers charge
Independent repairers in the UK typically charge £35–£50 for a GHD hair dryer repair, sometimes more if the motor board needs replacing. Some quote the part separately, and some don't include return postage, so check what the price covers before you compare.
Does GHD repair hair dryers?
GHD replaces a faulty dryer while it's under warranty, which is one or two years for its hair dryers, depending on the model, but doesn't repair dryers that are out of warranty. So if yours is in warranty, go to GHD or the retailer first: that costs you nothing. Once it's out of warranty, the choice is an independent repair or a new dryer.
What changes the price
The model. The Helios and the first Air have one fixed price each, because the parts that fail on them are known and the prices are close. The Air 2.0, the Speed and the Flight vary more, so I assess them first and quote.
The part. A cable, a switch or a thermal fuse is a small part. A heater, a fan or a motor board is a bigger one. On the Helios, my price covers any of them. On the Air, it covers all but the motor, which I quote separately if it needs replacing. Elsewhere, the motor board is usually what pushes a quote up.
What's included. Return postage, a safety test and a warranty all cost something. A cheaper price that leaves them out can end up costing the same.
The common faults
Won't turn on. Usually the cable, a switch or a blown thermal fuse. The fuse cuts the power when a dryer overheats, and the usual reason it overheats is a blocked filter.
Blowing cold. The fan runs but the air stays cool: usually the heater or the circuit that powers it.
Cutting out. Usually heat protection. Clean the filter first. If it still cuts out, the fault is inside.
A pop or a burning smell. Stop using it and unplug it. A component has probably failed.
Flashing red on a GHD Speed. The Speed shuts itself down to protect itself from heat, and the light flashes red. A blocked filter is the most common reason.
Try this first: clean the filter
It costs nothing, and it solves more cutting out and weak airflow than anything else. Unplug the dryer and let it cool fully. Take the filter off the back, following GHD's instructions for your model, and brush the mesh clean with a dry, soft brush. Refit it before you switch the dryer on. If the fault is still there, it's time for a repair.
Repair or replace?
A new GHD dryer costs a good deal more than my repair price, so for an out-of-warranty Helios or Air, a repair is usually the better value. It also keeps a working dryer out of landfill. The case for replacing is a dryer that's both old and has more than one serious fault, and with the Speed and Flight, the assessment tells you which you're dealing with before you spend anything more.
How to book
Choose your model on my GHD hair dryer repair page, book and pay online, then post the dryer to me in a padded box. I email you at each stage, and it comes back by tracked post. For other dryers, see Dyson Supersonic repair, and for straighteners, GHD straightener repair.